You were never here, you didn't see anything..

Nokia IP690 & pfsense – dmesg


First of many, this is the dmesg output from pfsense booting on the Nokia IP690:

EDIT: Seems the CMS in use for the site likes to eat a few characters in certain cases. Just in case, a text version of the dmesg.boot can be found here.

Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:33:39 CDT 2015
    root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_SMP.10 i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(TM) CPU                 @ 2.00GHz (1995.04-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Family = 0x6  Model = 0xe  Stepping = 8
  Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0xc1a9 SSE3,MON,VMX,EST,TM2,xTPR,PDCM
  AMD Features=0x100000 NX 
  TSC: P-state invariant, performance statistics
real memory  = 2145886208 (2046 MB)
avail memory = 2070962176 (1975 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: INTEL  TIANO   
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic2: Changing APIC ID to 4
ioapic3: Changing APIC ID to 5
ioapic4: Changing APIC ID to 6
ioapic5: Changing APIC ID to 7
ioapic6: Changing APIC ID to 8
ioapic0 Version 2.0 irqs 0-23 on motherboard
ioapic1 Version 2.0 irqs 72-95 on motherboard
ioapic2 Version 2.0 irqs 24-47 on motherboard
ioapic3 Version 2.0 irqs 48-71 on motherboard
ioapic4 Version 2.0 irqs 96-119 on motherboard
ioapic5 Version 2.0 irqs 120-143 on motherboard
ioapic6 Version 2.0 irqs 144-167 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc08109b0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0810a60, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0810b10, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0839140, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc08391f0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc08392a0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
random:  initialized
module_register_init: MOD_LOAD (vesa, 0xc120e850, 0) error 19
cryptosoft0:  on motherboard
padlock0: No ACE support.
acpi0: INTEL TIANO on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
cpu0: ACPI CPU on acpi0
cpu1: ACPI CPU on acpi0
attimer0:  port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: AT realtime clock port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
pci1: ACPI PCI bus on pcib1
pcib2:  at device 0.0 on pci1
pci2: ACPI PCI bus on pcib2
em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x5040-0x507f mem 0x80400000-0x8041ffff irq 24 at device 1.0 on pci2
em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x5000-0x503f mem 0x80420000-0x8043ffff irq 25 at device 1.1 on pci2
pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
pci3: ACPI PCI bus on pcib3
em2: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x4040-0x407f mem 0x80300000-0x8031ffff irq 48 at device 1.0 on pci3
em3: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x4000-0x403f mem 0x80320000-0x8033ffff irq 49 at device 1.1 on pci3
pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
pci4: ACPI PCI bus on pcib4
pcib5: ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: ACPI PCI bus on pcib5
pcib6: ACPI PCI-PCI bridge at device 0.2 on pci4
pci6: ACPI PCI bus on pcib6
pcib7: PCI-PCI bridge at device 1.0 on pci6
pci7: PCI bus on pcib7
em4: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x30c0-0x30ff mem 0x80100000-0x8011ffff irq 120 at device 12.0 on pci7
em5: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x3080-0x30bf mem 0x80120000-0x8013ffff irq 121 at device 12.1 on pci7
em6: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x3040-0x307f mem 0x80140000-0x8015ffff irq 122 at device 14.0 on pci7
em7: Intel(R) PRO/1000 Legacy Network Connection 1.0.6 port 0x3000-0x303f mem 0x80160000-0x8017ffff irq 123 at device 14.1 on pci7
pcib8: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
pci8: ACPI PCI bus on pcib8
pcib9: ACPI PCI-PCI bridge at device 0.0 on pci8
pci9: ACPI PCI bus on pcib9
pci9:  at device 1.0 (no driver attached)
pcib10: PCI-PCI bridge at device 0.2 on pci8
pci10: PCI bus on pcib10
pcib11: ACPI PCI-PCI bridge at device 28.0 on pci0
pci11: ACPI PCI bus on pcib11
uhci0: UHCI (generic) USB controller port 0x6040-0x605f irq 16 at device 29.0 on pci0
usbus0 on uhci0
uhci1: UHCI (generic) USB controller port 0x6020-0x603f irq 19 at device 29.1 on pci0
usbus1 on uhci1
ehci0: Intel 6300ESB USB 2.0 controller mem 0x80601000-0x806013ff irq 23 at device 29.7 on pci0
usbus2: waiting for BIOS to give up control
usbus2: timed out waiting for BIOS
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib12: ACPI PCI-PCI bridge at device 30.0 on pci0
pci12: ACPI PCI bus on pcib12
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel 6300ESB SATA150 controller port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6060-0x606f irq 18 at device 31.2 on pci0
ata0: ATA channel> at channel 0 on atapci0
ata1: ATA channel at channel 1 on atapci0
acpi_button0: Power Button on acpi0
uart0: Non-standard ns8250 class UART with FIFOs port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: Non-standard ns8250 class UART with FIFOs port 0x2f8-0x2ff irq 3 on acpi0
atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0
atkbd0: AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
est0: Enhanced SpeedStep Frequency Control on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr c1e0c1e06000c1e
device_attach: est0 attach returned 6
p4tcc0: CPU Frequency Thermal Control on cpu0
est1: Enhanced SpeedStep Frequency Contro> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr c1e0c1e06000c1e
device_attach: est1 attach returned 6
p4tcc1: CPU Frequency Thermal Control on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: Intel at usbus0
uhub0: Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr > on usbus0
ugen1.1: Intel at usbus1
uhub1: Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr > on usbus1
ugen2.1: Intel at usbus2
uhub2: Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr > on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: WDC WD3200BEKT-00PVMT0 01.01A01 ATA-8 SATA 2.x device
ada0: Serial Number WD-
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata1 bus 0 scbus1 target 0 lun 0
ada1: WDC WD3200BEKT-00PVMT0 01.01A01 ATA-8 SATA 2.x device
ada1: Serial Number WD-
ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada1: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad2
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1995036840 Hz quality 1000
GEOM_MIRROR: Cancelling unmapped because of ada0.
GEOM_MIRROR: Cancelling unmapped because of ada1.
GEOM_MIRROR: Device mirror/pfSenseMirror launched (2/2).
Trying to mount root from ufs:/dev/mirror/pfSenseMirrors1a [rw]...

Have any Question or Comment?

One comment on “Nokia IP690 & pfsense – dmesg

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This blog is kept spam free by WP-SpamFree.

Most who fail…

Most who fail have yet to really try!